top of page

Control Specs.

Power supply: 460V/60, 600V/60Hz or 400V/50Hz

VFD type: ABB or VACON

Enclosure: Painted carbon or stainless steel and ratings for indoor and outdoor applications.

HMI: Omron 6’’ or 12’’ (depending on requirements)

Bearing Temperature Sensor: Pt100 bayonet, 1 on each main bearing.

Vibration monitoring: 4-20ma Wilcoxon sensor, 1 on main bearing pad

Safety Controls: (1) Speed sensor on back drive coupling.

  1. Speed sensor on bowl.

  1. Lid/cover open sensor.

Frame/Case Specs.

Material-frame/base: Mild steel epoxy painted

Materials-casing/cover: 1.4401

Inside surface of casing: Stainless steel

Gaskets/seals-casing: Buna-N on case

Design type: Atmospheric seals

Feed tube: 316L 3’’ npt.

*feed capacity based on municipal applications. Actual throughput based on sludge characteristics. Allied reserves the right to change spec.s without prior notification

Dimensions (mm)

DX700 brochure dims.PNG

DX 700

General Specs.

Specification: VFD, 2-phase

Process liquid: Min. 0°C (32°F) - Max. 100°C (212°F)

Feed Capacity*: 68-159 M3/h (300-700 GPM)

Empty decanter weight: 15800kg (34833lbs)

Sound level: 90 dBA at 1m

Cake Dryness: 20-40% (depending on application)

Conveyor Specs.

Material-flights: 1.4401

Material-hub: 1.4401

Bearing Lubrication: Manually applied grease

Flow type: Axial (Radial depending on application)

Flight pitch: Variable

Bowl Specs.

Maximum main speed: 2800 rpm

Maximum G-force: 3345 G

L/D ratio: 4.25:1

Bowl diameter: 762 mm (30”)

Beach angle: available in 8° or 15° (depending on application)

Solids discharge type: 8 replaceable wear inserts

Solids Discharge diameter: 423 mm (16.68”)

Solids transportation aids, cylindrical section: 40 ribs

Solids transportation aids, taper section: 30 ribs

Material-bowl/hubs: 1.4470

Material-bolts: AISI 316

Material-seals: Viton/Buna-N

Liquid outlet, type: (4) Enerport plate dams

Liquid outlet, radius: (adjustable)

Bearing Lubrication: Forced air oil lubrication

Drive Specs.

Gearbox type: 30 knm (265522 inch/lbs) Cyclo

Gearbox lubrication: Oil capsulated

Typical differential range: 2-50 rpm

Main motor: 150Kw (200hp) WEG foot mount TEFC HE (SF1.15) (TEXP optional)

Back drive motor: 45Kw (60hp) WEG foot mount TEFC HE (SF1.15) (TEXP optional)

Wear Specs.

Bowl solids discharge: Silicon carbide liner

Conveyor flights: Tungsten tiles over feed and conical, Flame applied tungsten carbide on cylindrical section.

Conveyor feed zone: Removable wear liners

Frame/Case: Removable semi-circle wear liner

Request a Quote

Download Specs.

bottom of page