Specification: VFD, 2-phase
Process liquid: Min. 0°C (32°F) - Max. 100°C (212°F)
Feed Capacity*: 5-14 M3/h (20-60 GPM)
Empty decanter weight: 900kg (1984lbs)
Sound level: 90 dBA at 1m
Cake Dryness: 20-40% (depending on application)
Bearing Lubrication: Manually applied grease
Flow type: Axial
Flight pitch: Variable
Maximum main speed: 4250 rpm
Maximum G-force: 3600 G
L/D ratio: 4.25:1
Bowl diameter: 356 mm (14”)
Beach angle: available in 8° or 15° (depending on application)
Solids discharge type: 8 replaceable wear inserts
Solids Discharge diameter: 197.78 mm (7.79”)
Solids transportation aids, cylindrical section: 12 ribs
Solids transportation aids, taper section: 16 ribs
Material-bolts: AISI 316
Liquid outlet, type: (4) Enerport plate dams
Liquid outlet, radius: (adjustable)
Bearing Lubrication: manually applied grease (optional automatic system available)
Power supply: 208V/60Hz, 460V/60, 600V/60Hz or 400V/50Hz
VFD type: ABB or VACON
Enclosure: Painted carbon or stainless steel and ratings for indoor and outdoor applications.
HMI: Omron 6’’ or 12’’ (depending on requirements)
Bearing Temperature Sensor: Pt100 bayonet, 1 on each main bearing.
Vibration monitoring: 4-20ma Wilcoxon sensor, 1 on main bearing pad
Safety Controls: (1) speed sensor on back drive coupling.
Speed sensor on bowl.
Lid/cover open sensor.
Material-frame/base: Mild steel epoxy painted
Inside surface of casing: Stainless steel
Gaskets/seals-casing: Buna-N on case
Design type: Atmospheric seals
Feed tube: 316L 1’’ npt.
*feed capacity based on municipal applications. Actual throughput based on sludge characteristics. Allied reserves the right to change spec.s without prior notification
Gearbox type: 2.0 knm (17701 inch/lbs) Cyclo
Gearbox lubrication: Manually applied grease
Typical differential range: 2-50 rpm
Main motor: 15.5Kw (20hp) WEG foot mount TEFC HE (SF1.15) (TEXP optional)
Back drive motor: 7.5Kw (10hp) WEG foot mount TEFC HE (SF1.15) (TEXP optional)
Bowl solids discharge: Tungsten carbide liner
Conveyor flights: flame applied tungsten carbide (weld on tiles optional)
Conveyor feed zone: Removable wear liners
Frame/Case: Removable semi-circle wear liner